Universal plug UX
Product Description
The nylon plug for all building materials
The fischer universal plug UX is a plastic plug made from high-quality nylon. The universal plug expands in solid building materials and knots in hollow and panel building materials for maximum hold. This makes the fischer UX always the right choice – even if the for unknown building materials. The edge prevents it from slipping deeper during installation. In the version without edge, and larger anchorage depths, the fischer universal plug UX is suitable for push-through installation. The fischer universal plug UX is recommended, for example, for fixing lighting, curtain rails, lightweight cupboards and skirting. The fixing sets with screws, eye screws and hooks provide the optimum solution for almost all applications.
Advantages
- The universal operating principle (knotting or expanding) allows for use in all solid, hollow, and board building materials. Thus the UX is the correct choice for unknown base materials.
- The UX's angled connection ridges allow for optimum screw guidance. Serrated anti-rotation locks prevent rotation in the drill hole. This guarantees the greatest possible installation safety.
- Fixing sets with screws, eye screws and hooks provide the right solution for all applications.
Application and permission
Applications
- Pictures
- Lighting
- Skirting
- Light cabinets
- Towel rails
- Mirror cabinets
- Curtain rails
- Wash basin fixings
- TV consoles
- Plumbing and heating fixings
Building materials
- Concrete
- Gypsum plasterboard and gypsum fibreboards
- Vertically perforated brick
- Hollow blocks made from lightweight concrete
- Cavity floor slabs made from bricks and concrete
- Perforated sand-lime brick
- Solid sand-lime brick
- Natural stone
- Aerated concrete
- Chipboard
- Solid panel made from gypsum
- Solid brick made from lightweight concrete
- Solid brick
* You can find detailed information on building materials in the registration document.
Assembly Instruction
- The UX with rim is suitable for pre-positioned installation; the UX without rim is suitable for push-through installation.
- Turning in the screw causes the UX to expand in the solid building material and to knot within the cavity.
- The required screw length is given by the plug length + fixture thickness + 1 x screw diameter.
- Suitable for wood and chipboard screws, as well as stud screws.
- In the case of board building materials, the threadless part of the screw must not be longer than the fixture, and the UX with rim is to be used.
- The edge distance must be at least one plug length.
