Plasterboard fixing GK
Product Description
The fastest installation in gypsum plasterboard
The Fischer plasterboard fixing GK is made from high-quality nylon. The fixing is screwed in the pre-positioned installation with the enclosed setting tool flush to the surface and single and double-planked gypsum plasterboard. The spiral plug holds by creating a form fit. The compact design also allows installation in walls, where the panel thickness or the cavity behind the panel is unknown. The Fischer GK can hold wood, sheet metal, and chipboard screws from 4 to 5 mm thickness as well as different hooks and eye screws. Consequently, it is universally suitable for fixing e.g. pictures, lights, and electrical installations securely and quickly.
Advantages
- The included setting tool combines the drilling and fixing setting functions. It thus allows for a fast and simple installation.
- The sharp, self-tapping thread of the GK enables a secure, positive fit fixing. This achieves a high load-bearing capacity.
- The short fixing length means that only a small amount of space is required behind the board. As a result, the GK can also be used in the case of unknown board thickness and cavity depth.
- The cross-drive recess in the head of the fixing means that the GK can also be screwed out like a screw without a setting tool.
- The GK can be used with the most wide-ranging screws, hooks and eye screws. This allows for a broad range of applications.
Application and Permission
Applications
- Pictures
- Lighting
- Electrical installations
- Fitting accessories
- Series installations
Building materials
- Gypsum plasterboard, single and double-planked
* You can find detailed information on building materials in the registration document.
Assembly Insturction
- The gypsum plasterboard fixing GK is suitable for pre-positioned installation.
- The GK is screwed flush into the gypsum plasterboard using the setting tool provided. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver.
- Adapted for wood, self-tapping and chipboard screws of 4.0 to 5.0 mm diameter.
- For board thicknesses greater than 15 mm, drill a hole first by using the setting tool.
- Not suitable for gypsum fibreboard and tiled plasterboard.
