10Gx40 Bremick MultiOne Truss CSK Head Screw TX20 B8 Coating

SKU

SHMT1040

Pack Quantity: 150
Weight per unit: 0.0070kg

Product Details

The MultiONE™ screw is a multi-purpose fastener for use in multiple materials such as Softwood, Hardwood, Treated Timbers, Composite boards, Laminated Boards, Brick, Block, Concrete & various metals.

PLEASE NOTE: Bremick® recommends the use of specialised screws for load critical and/or structural applications and/or specialised installations eg. roofing, LVL’s etc. Refer to material suppliers recommended fasteners for any specialised applications.

Contour Head
Used when broad holding power &/ or a decorative look is required. The underside of the head is flat and ideal for fixing sheet materials or heavier timbers.

Driver bits
MultiONE™ screws include a complimentary TORX® compatible drive to optimise torque transfer from the drill driver to the screw. Always use the correct driver bit to suit the screw diameter

Technical Data

Screw Gauge	Driver Truss Head	Driver Contour Head	Axial Tensile (kN)	Single Shear (kN)	Torsional (Nm)
10ga	T20	T25	10.6	8.3	11.4
12ga	T25	T30	14	9.6	13.5

Screw Size	F5 (Softwood) Min. Embed.‡ Depths (mm)	F17 (Hardwood) Min. Embed.‡ Depths (mm)	F5 (Softwood) 30mm Embed. Axial Withdrawal Forces (kN)	F17 (Hardwood) 30mm Embed. Axial Withdrawal Forces (kN)	1.5mm BMT G450 Steel Purlin Axial Withdrawal Forces (kN)	Min Pilot Hole Depth (mm)	Min Embed.‡ Thread Depth (mm)	Clamping§ Capacity 'Truss' Head (max)	Clamping§ Capacity 'Contour' Head (max)	Max Safe lOAD IN 25MPA Concrete (kg)	Max Load in Extruded Common Brick (kg)
10 x 30	25	20	3.5	7.1	3.6	50mm	25mm	2mm	5mm	86	78
10 x 40	30	25	3.5	7.1	3.6	60mm	25mm	12mm	15mm	86	78
10 x 50	35	30	3.5	7.1	3.6	70mm	25mm	22mm	25mm	86	78
10 x 65	35	30	3.5	7.1	3.6	85mm	25mm	37mm	40mm	86	78
10 x 75	35	30	3.5	7.1	3.6	95mm	25mm	47mm	50mm	86	78
12 x 100	65	50	3.7	7.5	3.9	120mm	35mm	62mm	65mm	105	96