The anchor rod FIS A can be set with variable anchorage depths. This enables the system to be ideally adjusted to the load to be supported. This optimises the use of materials. The epoxy resin mortar is suitable for fixings in indoor and outdoor areas such as shear connectors for concrete layers, high racks, or heavy-duty steel constructions.

Top Features

• FIS EM Plus with optimised formulation for improved load values in cracked and non-cracked concrete.
• The ETA assessment guarantees a service life of 100 years, an external expert report even up to 120 years.
• For rebar connections from diameter 8 to 40 mm.
• Can be used with threaded rod FIS A or internal threaded anchor RG M I for temporary and removable fixing points.
• FIS EM Plus is to be processed at temperatures down to -5°C.
• More safety due to approvals for diamond drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2.

Functionality

• The epoxy mortar FIS EM Plus combined with the FIS A threaded rod, is suitable for pre-positioned and push-through installation and with the internal threaded anchor RG M I for pre-positioned installation.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
• The mortar is injected bubble-free from the drill hole base.
• The mortar bonds the entire surface of the anchor with the drill hole wall and seals off the drill hole.
• The anchor is set manually by lightly rotating it until it reaches the drill hole base.
• During push-through installation, the annular gap between the anchor rod and attachment is filled with FIS EM Plus.