The assembly of the internal thread anchor is extremely cost-effective thanks to the low embedment depth, fast hammerset installation, and direction-controlled screwing process. The EA N is mounted with the hammer flush to the base material. With the setting tool EA-ST, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion.

Top Features

• Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
• Use of standard metric screws and threaded rods lowers complexity.
• Power-saving series installation with machine setting tool EA II S-SDS.
• ETA approval for non-cracked concrete and multiple fixings.
• Made of stainless steel for fixings used outside.

Advantages

• The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation.
• The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
• The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
• The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
• Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded.
• The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.