We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The fischer anchor bolt FAZ II is recommended for fixing heavy objects in concrete. The proven expansion clip corresponds to the strictest requirements expected of the steel anchor. When tightening, the expansion clip pulls the nut towards the drill hole wall and ensures that it is safely fixed. The steel anchor can be easily mounted. Drive in using the hammer, then tighten with a torque wrench - job done. The bolt anchor made of zinc-plated steel can be used in a particularly flexible manner, as a wide range of objects in internal areas can be fixed, such as TV consoles, bannisters, or cable trays.
Top Features
- The world's first bolt anchor with 6 mm drill hole diameter and ETA Option 1 for concrete.
- The tried-and-tested expansion clip ensures the maximum load-bearing capacity, even with size M6.
- General design certification for anchorage in steel fiber concrete for the fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).
Advantages
- The world's first bolt anchor with 6 mm drill hole diameter and ETA Option 1 for secure and reliable anchoring.
- The international approvals guarantee maximum safety and the best performance.
- General design certification for anchorage in steel fiber concrete for the fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).
- Fewer hammer blows and minimum torque slippage ensure a noticeably simple and comfortable setting process.
Applications
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Gates
- Façades
- Timber constructions
Building materials
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Steel fiber concrete
Also suitable for:
- Concrete C12/15
- Concrete C80/95 (classification available)
- Natural stone with dense structure
Approval
- ETA-05/0069
- DoP No. 0186
- Z-21.1-2145
- ESR-2948
- 3023222
Specifications
Diameter | M20 |
Length | 172 mm |
Material | Carbon Steel |
Finish | Zinc Plated |
Hole Diameter | 20 |
Head Type | Hex Nut |
Drive | SW30 |
Supplier Part No. | 46632 |
Max Fixture Thickness (mm) | 30 / - |